When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

The 360 intake tube is tight inside the flange, hence why I'd stripped the powder coat off.  It does work, its just tight.

The 320 intake tube I couldn't get to seal up, so I just put a new one on.

The intake flanges were all ones I rejected, and have since just been replacing with new, every time.

Baffles are useable as is.

both -35 pushrods have 0.005" runout, and I scrap them at 0.004"