Aircraft Grade PAR36 LED Landing & Taxi Light SET | 12/28 Volt


Click here to purchase or contact the seller of this item on eBay

Current Price: 148.00 USD

PAR36 LANDING & TAXI LIGHT BUNDLE
Overview
LAND Specs
TAXI Specs
Cross Ref Data

What's in the Box?

1pc - PAR36 Landing/Spot Light

1pc - Taxi/Flood Light


Our LED PAR 36 S-Series Landing and Taxi Lights are engineered to be a drop-in replacement for ALL PAR 36 legacy lamps. Meets and even exceeds the brightness of 100-watt sealed beam bulbs but draws a mere 1.0amps @14VDC versus a staggering 7.5amps for the original. Free up valuable current for critical systems such as Communication/Navigation Equipment and electric Landing Gear and Flap motors. Our solid-state circuit design is immune to vibration and engineered with a design life greater than 20,000 hours, so leave it on for all phases of flight to drastically increase daytime recognition and collision avoidance. Our PAR36 S-L LED retrofit lamp set is a no brainer when the time comes to upgrade your landing light from the dinosaur age. NOT FAA/PMA APPROVED.



SAFETY - EFFICIENCY - DURABILITY

WITHOUT COMPROMISE

   

LED Parameters:6pc 3watt CREE XP-E
Input Voltage:+10 to + 30 VDC
Current:1.0Amps @ 14VDC / 0.50Amps @ 28VDC
Luminous Flux1,450lm
Color Temp:6,000K
Beam Projection:15° Vert 15° Horizont
RFI ProtectionIntegrated Noise Filters (RFI Free)
Duty Cycle:Continuous; Wig-Wag Compatible
Housing Material:Aluminum Alloy
Lens Material:Shatterproof Polycarbonate
Design Life:> 20,000hrs
Wire Termination:8/32 SAE Srew Terminals
ANSI Spec:PAR36
Dimensions:4.38" dia x 1.38" depth
Certifications:NOT FAA/PMA APPROVED





LED Parameters:6pc 3watt CREE XP-E
Input Voltage:+10 to + 30 VDC
Current:1.0 Amps @ 14VDC / 0.50 Amps @ 28VDC
Luminous Flux1,450lm
Color Temp:6,000K
Beam Projection:15° Vert 45° Horizont
RFI Protection:Integrated Noise Filters (RFI FREE)
Duty Cycle:Continuous; Wig-Wag Compatible
Housing Material:Aluminum Alloy
Lens Material:Shatterproof Polycarbonate
Design Life:> 20,000hrs
Wire Termination:8/32 SAE Screw Terminals
ANSI Spec:PAR36
Dimensions:4.38" dia x 1.38" depth
Certifications:NOT FAA/PMA APPROVED

​​​​​​​​DROP-IN REPLACEMENT FOR ALL PAR36 SEALED BEAMS AND OEM BULB #'s:​​​​​​​

​​​​​​​

LANDING:  4505,  4509,  Q4509, 4591,  4594,  4595  4596,  Q4631,  H7604


TAXI:  4313,  4502,   4587,  4589,  4593,  4626,  4627, 4700

LED lighting helps to promote environmental sustainability by reducing energy consumption
Guaranteed EMI/RFI Free
DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS
IN THE 
USA
WHY CHOOSE AERO-LITES?
— Guaranteed plug and play fit for all PAR 36 size housings.
— Extreme brightness for night landing and daytime recognition.
— 20,000hr average service life. 
— Low current draw for decreased electrical loads. Reserve power for mission critical components like radios and navigation equipment. 
— Low current allows continuous utilization in ALL phases of flight to dramatically increase visual aircraft recognition. 
— No heat facilitate continuous use without fear of melted acrylic lens cover fairings. 
— Less load on alternator/generator for increased service life. 
— Less demand on battery for longer service life. 
— Increased brake horsepower due to less load on the alternator/generator.
— Better fuel economy/longer range due to less load on alternator/generator.

Aircraft Grade PAR36 LED Landing & Taxi Light SET | 12/28 Volt Aircraft Grade PAR36 LED Landing & Taxi Light SET | 12/28 Volt Aircraft Grade PAR36 LED Landing & Taxi Light SET | 12/28 Volt
Aircraft Grade PAR36 LED Landing & Taxi Light SET | 12/28 Volt


Click here to purchase or contact the seller of this item on eBay