HyJet IV-A plus Phosphate Ester Aviation Hydraulic Fluid 1 gallon Jet AircraftClick here to purchase or contact the seller of this item on eBay |
||
Current Price: 109.99 USD |
ExxonMobil HyJet IV-A A plus Phosphate Ester
Product Description
Exxon HyJet IV-Aplus is a fire-resistant phosphate ester hydraulic fluid designed for use in commercial aircraft. It is the best-performing Type IV fluid and approaches to a great extent many of the performance capabilities of Type V fluids, including high temperature stability, long fluid life, low density, and rust protection. It is superior to all other Type IV fluids in these respects. Exxon HyJet IV-A plus meets the specifications of all major aircraft manufacturers and SAE AS1241.
ExxonMobil Aviation, United States
Fire-Resistant Phosphate Ester Aviation Hydraulic Fluid
Features and Benefits
Exxon HyJet IV-A plus offers the following key features and benefits:
Features | Advantages and Potential Benefits |
Best in high temperature stability among Type IV fluids | Longer fluid life. Lesser need to replace fluid due to degradation. Reduced hydraulic system maintenance costs |
Lowest density Type IV fluid | Reduced weight of the hydraulic fluid carried by aircraft. Reduced aircraft fuel consumption, lower operating costs |
Effective rust protection | Reduced the risk of equipment damage in the event of major water contamination |
Excellent low temperature flow (viscosity) properties | Precise hydraulic system control and response even during extended range/polar flights. Longer equipment life |
Excellent deposit control | Longer equipment life. Reduced maintenance costs |
Excellent protection against electro-chemical corrosion (erosion) | Protection against servo valve and pump damage |
Approved by all major aircraft manufacturers | Use as fleet lubricant by airline operators |
Fully compatible with all approved phosphate ester hydraulic fluids | Flexibility in use by airline operators |
Applications
Exxon HyJet IV-A plus fire-resistant aviation hydraulic fluid is used in commercial aircraft hydraulic systems where phosphate hydraulic fluids are recommended. It is compatible in all proportions with commercial Type IV and Type V phosphate ester aviation hydraulic fluids.
Exxon HyJet IV-A plus meets or exceeds the following industry and aircraft builder specifications. It is approved against all commercial aircraft manufacturer requirements and is included in their Qualified Products Lists.
Specifications and Approvals
HyJet IV-A plus | Meets Type IV, Low density | Is in Qualified Products List |
SAE Aerospace Standard AS1241C | X | Not Applicable |
Airbus NSA307110N | X | X |
ATR NSA307110N | X | X |
Boeing BMS 3-11P, Type IV, Grade B and Grade C | X | X |
Boeing (Douglas Division) DMS 2014H, Type 4 | X | X |
British Aerospace (Avro) BAC.M.333C | X | X |
Bombardier/Canadair BAMS 564-003A | X | X |
Bombardier/DeHavilland | X | X |
Cessna | X | X |
Embraer | X | X |
Fokker | X | X |
Gulfstream Aerospace 1159SCH302J | X | X |
Lockheed C-34-1224C | X | X |
Typical Properties
Test Method | HyJet IV-A plus (1) | Limits | |
Kinematic Viscosity, cSt | ASTM D 445 | ||
at -53.9ºC (-65ºF) | 1320 | 2000 max | |
at -26.1ºC (-15ºF) | 130 | 135 max | |
at 37.8ºC (100ºF) | 10.6 | 10.0 -11.0 | |
at 98.9ºC (210ºF) | 3.6 | 3.35 - 3.75 | |
at 127.6ºC (260ºF) | 2.6 | 1.5 min | |
Viscosity Index | ASTM D 2270 | 280 | |
Shear Stability, % Viscosity Drop at 40ºC | ASTM D 5621 | 22 | |
Pour Point, ºC (ºF) | ASTM D 97 | ‹-62 (-80) | -62 (-80) max |
Specific gravity at 25ºC/25ºC (77ºF/77ºF) | ASTM D 4052 | 0.996 | 0.990 -1.002 |
Density at 15.6ºC (60ºF), g/mL (lb/gal) | ASTM D 4052 | 0.999 (8.35) | |
Acid Number, mg KOH/g | ASTM D 974 | 0.04 | 0.1 max |
Water, Karl Fischer, mass % | ASTM D 6304 | 0.1 | 0.2 max |
Flammability | |||
Flash Point, ºC (ºF) | ASTM D 92 | 176 (349) | 160 (320) min |
Fire Point, ºC (ºF) | ASTM D 92 | 188 (370) | 177 (350) min |
Autoignition Point, ºC (ºF) | ASTM D 2155 | ›427 (800) | 400 (752) min |
Foaming Tendency/Stability, mL foam/sec to collapse | ASTM D 892 | ||
Sequence I | 27/15 | 250/100 max | |
Sequence II | 23/13 | 150/50 max | |
Sequence III | 28/16 | 450/250 max | |
Particle count, NAS 1638 Class | Auto Counter | 4 | 7 max |
Chemical Elements, ppm | |||
Calcium | 103 | 120 max | |
Potassium | 38 | 48 max | |
Chlorine | 10 | 50 max | |
Sodium | 1 | 15 max | |
Sulfur | 224 | 350 max | |
Four-Ball Wear, Scar diameter at 75ºC/600rpm/1hour, mm | Modified ASTM D 4172 | ||
4 kg | 0.22 | 0.45 max | |
10 kg | 0.33 | 0.50 max | |
40 kg | 0.73 | 0.55 – 0.85 | |
Electrical Conductivity at 20ºC, microSiemens/cm | 1.4 | 0.5 min | |
Bulk Modulus, Isothermal secant at 100ºF/3000 psi, psi | 210,000 | ||
Thermal Conductivity at 40ºC, cal/sec/cm2/ºC (Btu/hr/ft2/ºF) | 33x10^-5 (0.0799) | ||
Coefficient of thermal expansion, 25 to 100ºC, per ºC (per ºF) | 0.00086 (0.00048) | ||
Specific heat capacity at 40 ºC, cal/g/ºC (same as Btu/lb/ºF) | 0.41 | ||
(1) Values may vary within modest ranges |
You are welcome to come personally inspect this item or email / call with any questions.
Shipping: Free shipping to any address in the continental USA (we also ship internationally, for cost see shipping & payments section).
Check our other auctions for more......
We have been an Ebay member since 2001 with 100% positive feedback, so buy with confidence.
If you have any questions about this item, feel free to send us a message and we'll do our best to answer them.
Specifications:
- Part number: HyJet IV-A plus
- Application: Airbus NSA307110N,ATR NSA307110N,Boeing BMS 3-11P, Type IV, Grade B and Grade C
- Stock #: 1813
We aim to be your #1 source for high quality parts and accessories.
This item has a 100% satisfaction guarantee!
Free shipping within the continental USA!
Check back often for more products and solutions.
We strive to give our buyers the best possible experience with their purchases from us, if there is anything we can do to make your experience better, feel free to reach out to us. We look forward to serving you.
Terms of Sale:
Winning bidder agrees to pay total amount within 5 calendar days of the end of the auction. If after 5 days of closing the winning bidder has not paid, we reserve the right to re-list this item. Our preferred method of payment is Paypal, although we also accept payment of Cashiers Checks, company check or cash upon pick-up. Items paid for by check will be held until the check clears the bank.
Click here to purchase or contact the seller of this item on eBay