LYCOMING SILICONE VALVE COVER GASKET RG-75906-SP FITS O-235, & MORE SEE BELOW


Click here to purchase or contact the seller of this item on eBay

Current Price: 9.00 USD

LYCOMING SILICONE VALVE COVER GASKET 


Our silicone rubber gaskets are made from aerospace mechanical grade AMS silicone and designed to 

withstand temperatures up to 400 degrees Fahrenheit.    

Our gaskets seal uneven surfaceseliminate corrosion and are 100% reusable.


FITS:     LYCOMING  O-235, O-290, O-320, IO-320, O-360, IO-360, HIO-360, O-480, O-540, IO-540 

OEM #: 75906

PART#:   RG-75906-SP

6 BOLT HOLE GASKET    -    FAA-PMA

Gasket is 1/8" thick.


THE GASKET SURFACES MUST BE CLEAN AND DRY - remove all traces of oil.


INSTALLATION AND MAINTENANCE PROCEDURE

 

1.        Remove the valve cover and gasket in accordance with the Lycoming procedure 

           or in accordance with an acceptable procedure used by the shop performing the installation.

 

2.        Clean the valve cover and the cylinder surfaces of all residual material.

 

3.        Install P/N RG-75906-SP,  DRY.

 

4.        Replace the valve cover and torque the cover bolts to 25 in-lbs.

 

5.       Check the cover bolt torque after an engine run-up  to take off power

           or first flight and re-torque the bolts to 20 in-lbs.


6        Check the cover bolt torque annually, and re-torque to 20 in-lbs, if necessary. 

re-us

Be sure to follow the torque instructions on the label.

**CAUTION**   DO NOT OVERTIGHTEN.    It makes the gasket bulge or squeeze out.


TO REUSE GASKET:   

Wash gaskets briefly in hot water and soap.   

Rinse well and dry thoroughly.   Re-install using the above installation instructions.

Keep instructions for future reference.


PROUDLY MADE IN THE USA!

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Use cork?    Get REAL!    REAL Gaskets that is…

REAL Gaskets Tennessee is a manufacturer of silicone rubber gaskets for aircraft, automobile, and motorcycle engines.

Our silicone rubber gaskets are made from aerospace mechanical grade AMS silicone, designed to withstand temperatures up to 400 degrees Fahrenheit and to last the life of the engine. Our gaskets seal uneven surfaces, eliminate corrosion and are 100% reusable.

We manufacture valve cover gaskets for:

Aircraft: Continental, Franklin, Lycoming, Pratt & Whitney and Wright radial piston aircraft engines.

Automobiles: Ford, GM, Mopar, Porsche and VW automobile engines

Motorcycles:  BMW, Harley-Davidson, Suzuki, BSA, Ducati, Moto Guzzi, Norton, Triumph, Saab and most other motorcycle engines (silicone valve cover gaskets to fit and rocker box gaskets.)

If you are tired of oil leaks, then a silicone rubber gasket is the only way to go, and REAL Gaskets Tennessee is the only place you can get “The Original” silicone rubber gasket.

MADE IN THE USA.


LYCOMING SILICONE VALVE COVER GASKET RG-75906-SP FITS O-235, & MORE  SEE BELOW LYCOMING SILICONE VALVE COVER GASKET RG-75906-SP FITS O-235, & MORE  SEE BELOW LYCOMING SILICONE VALVE COVER GASKET RG-75906-SP FITS O-235, & MORE  SEE BELOW


Click here to purchase or contact the seller of this item on eBay